HO-Matic AG
deenfr
Step 4 / 5
Caution

Do not use grease or oil.

Step 4
Moisten and screw down both sides
Required tools
  • Cordless screwdriver
  1. Moisten the inner wall of the sleeve on the first side with soapy water.
  2. Place the first threaded cover, with its bolts inserted, onto the housing and drive in the bolts with the cordless screwdriver.
  3. Turn the valve over and moisten the inner wall of the sleeve on the second side with soapy water.
  4. Place the second threaded cover, with its bolts inserted, onto the housing and drive in the bolts with the cordless screwdriver.
  5. Then tighten the bolts on both sides alternately with the cordless screwdriver.
Step doneBack
Caution
Step 1 · Open the valve

Before removal, please note: hazardous media may escape. Take appropriate precautions beforehand.