HO-Matic AG
deenfr
Step 3 / 6
Caution

The black locking pin must always be fully reinserted. Without it, the sleeve is not secured against twisting.

Step 3
Install and secure the new sleeve
  1. Take the new sleeve out of its packaging and push it fully into the valve housing.
  2. Turn the sleeve to the right as far as it will go to lock it in the housing.
  3. Then reinsert the black locking pin fully by hand to secure the sleeve against twisting.
Step doneBack
Caution
Step 1 · Remove the mounting flanges and the locking pin

Before removal, please note: hazardous media may escape. Take appropriate precautions beforehand.